Eble Werkzeugmaschinen

 

chip breaker - Grinding grooves STN 560

Back


Contact & Inquiry Basket

new machine
machine is designed to grind chip breaking flutes in saw blades of ca. Ø 80 ? 560 mm by CBN / DIA ? grinding wheel; Ø 30 x 0,3 mm.

Производитель: Eble
Модель: STN 560
Год: 2012
диаметр / дисковых пилы: 80 bis 560 mm
Вес: 350 kg

Accessories and Equipment

  • 1 Blade support for Ø 80 ? 560 mm, pin 16 mm
  • 1 set of centre rings Ø 16 x 22, 27, 23, 40, 50 mm
  • Mobile coolant tank with filter paper, Level indicator and drain cock - effective cooling direct on grinding point
  • Encapsulation of the grinding area through Hood with big visor, opening supported by gas spring
  • Interior Lighting by big halogen lamp, 55 Watt
  • Color blue, RAL 5014
  • Functional structure:
  • Input of Number of teeth by large buttons
  • Blade thickness will be arranged by dial indicator
  • Pneumatic fixation of the saw blade against the supporting point (existing plan impact is offset by); no further fixing by Locknuts ect. - thus very fast blade changes.
  • Drive electrical by Timing Belt
  • Operating Speed is adjustable on Potentiometer, regulated by former frequency
  • Slowing the flow of work on blades in Intervention (long life of the CBN / DIA - disk)
  • accelerated changeover operation to the next tooth (fast cycle time)
  • Cycle time on tooth and total running time can be seen on display; standings at grinding can be seen any time
  • After run out of total running time maschine is automatically shut off
  • Spindle is operated by compressed air (400 L/min)

The machine has been checked by us, as well as the Geometrie was controlled and can be seen and tested under power in our stock.

Errors and omissions excepted.

 
Harald Eble
Im Pfädle 14
71665 Vaihingen/Enz-Horrheim

Anfahrtsskizze

Telefon: +49 (0) 162/2387774
h.eble@bewema.com